水泥化糞池主要用于居民廢水處理，糞便環保處理使用，多個化糞池組合在一起可以處理大量的生活廢水，減輕了排水設備下水井的壓力，糞便，廢水等經過化糞池處理后，水質清澈可以直接排入下水道，當累積到一定程度后直接清理化糞池內雜物就可以了，以前化糞池多采用磚砌成型，容易滲漏，生產施工不變，化糞池模具采用混凝土澆筑成型，不滲漏，安裝方便快捷是新型的水泥制品。磚混化糞池由于計劃、施工、運用、處理等方面的許多疑問，致使95%以上的化糞池運用1- 2年后初步嚴重滲漏，由于不被人重視，化糞池滲漏疑問嚴重污染了地下飲用水源和城市地下供水管道，更為嚴重者形成建筑物不一樣程度歪斜。其他，傳統磚混化糞池由于缺少技術含量，處理水質差，排出污水嚴重超支，大大增加了污水處理廠的作業負荷，在無市政管網的少區域將傳統化糞池處理后的污水直接排入河湖，給周邊河湖水環境帶來嚴重損壞。傳統化糞池由于技術含量低，墮落功用差，混凝土化糞池，清掏周期短，假設平常維護處理不到位，還會出現種毒、暴炸等不安全風險。而如今的整體式水泥化糞池完全解決了這些問題。
The cement septic tank is mainly used for the treatment of residential wastewater and the environmental treatment of feces. The combination of multiple septic tanks can treat a large amount of domestic wastewater and reduce the pressure of drainage equipment under the water well. After being treated in the septic tank, the feces and wastewater can be directly discharged into the sewer. When they accumulate to a certain extent, it is OK to directly clean up the sundries in the septic tank. In the past, septic tanks were mostly built with bricks, which is easy to leak, The production and construction remain unchanged. The septic tank mold is cast with concrete, which is non leaking and convenient to install. It is a new type of cement product. Due to many questions about the planning, construction, operation and treatment of brick concrete septic tanks, more than 95% of septic tanks have preliminary serious leakage after 1-2 years of operation. Due to the lack of attention, the leakage of septic tanks has seriously polluted the underground drinking water source and urban underground water supply pipeline, and even more serious, the buildings have different degrees of deflection. In addition, due to the lack of technical content and poor treatment quality of traditional brick concrete septic tanks, the discharged sewage is seriously overspent, which greatly increases the workload of the sewage treatment plant. In a few areas without municipal pipe network, the sewage treated by traditional septic tanks is directly discharged into rivers and lakes, causing serious damage to the surrounding River and lake water environment. Due to the low technical content and poor degradation function of the traditional septic tank, the concrete septic tank has a short cleaning cycle. Assuming that the usual maintenance and treatment are not in place, there will be unsafe risks such as poisoning and explosion. Today's integral cement septic tank completely solves these problems.化糞池鋼模具節能環保,符合國家標準,解決能源,受用受力均勻的新結構,廣泛應用,,而且成本價低廉,采用新的理念和工藝,更可以節約成本,而且可任意組合,可利用率高,處理污水的能力很強,而且施工期端,安裝簡單方便,也是今后的發展方向?；S池模具目前主是以鋼模具為主,其中化糞池鋼模具成為了主要的生產工藝,先簡單介紹一下,化糞池主要用于樓群地下,用于儲備生活用水,化糞池需要定時的清理。Septic tank steel mold is energy-saving and environment-friendly, in line with national standards. It is a new structure that solves energy and is evenly stressed. It is widely used, beneficial to the country and the people, and the cost is low. The use of new ideas and processes can save costs. It can be combined arbitrarily, has high availability, and has a strong ability to treat sewage. In addition, it is easy to install at the end of the construction period, which is also the future development direction. At present, the septic tank mold is mainly steel mold, of which the septic tank steel mold has become the main production process. First of all, a brief introduction, septic tank is mainly used for underground buildings, used to store domestic water, and septic tank needs to be cleaned regularly.
