地下電線排管模具 多孔定制

地下電線排管模具 多孔定制電纜管模具單套電纜管模具整體風格多孔定制一般可在模具產品初步固化時脫模，不需要等到水泥完全干燥，以便更快地生產預制塊。由于水泥還沒有完全干燥，內部濕度可以保證，所以我們在澆水時應該對產品進行遮陽處理，以減輕產品的水蒸發速度。雖然設置了遮陽設備，但為了保證濕度，在后期維護中，我們還需要增加澆水次數，以保證產品質量，通過使用電纜管模具生產不會出現問題，可以有效地幫助我們提高整體生產速度。模具將設計成平模式，由于尺寸較大，所以我們將鋼板設計成可拆卸的樣式，通常通過螺釘固定，更容易操作，可以很容易地使用模具。生產模具時，鋼板厚度會根據規格設計加厚，使其具有更好的穩定性，從而保證客戶在生產過程中有更好的

The overall style of a single set of cable duct mold is multi hole customization. Generally, the mold can be demoulded when the mold product is initially cured. It is not necessary to wait until the cement is completely dry, so as to produce precast blocks faster. As the cement is not completely dry and the internal humidity can be guaranteed, we should shade the product during watering to reduce the water evaporation rate of the product. Although sunshade equipment is provided, in order to ensure humidity, we also need to increase watering times in later maintenance to ensure product quality. There will be no problems in production by using cable duct mold, which can effectively help us improve the overall production speed. The mold will be designed in a flat mode. Due to its large size, we design the steel plate in a detachable style, which is usually fixed by screws, making it easier to operate and use the mold easily. During mold production, the thickness of steel plate will be thickened according to the specification design, so that it has better stability, so as to ensure that customers have better