高速鐵路電纜槽模具設計方式與說明

高速鐵路電纜槽模具設計方式與說明在高鐵、鐵路的建設上的應用都是比較多的，這種模具有塑料和鋼板兩種材質。鋼制的電纜槽模具的制作方式是比較傳統的，制作的過程需要的人力資源是比較多的。而且這種模具還有就是這種模具的結構是比較復雜的，所以為了更好的脫模，這種模具內的結構是可以拆分和安裝的。

The design method and description of high-speed railway cable trough mold are widely used in the construction of high-speed railway and railway. This mold has two materials: plastic and steel plate. The manufacturing method of steel cable tray mold is more traditional, and the manufacturing process requires more human resources. Moreover, the structure of this mold and this mold is relatively complex, so in order to better demould, the structure in this mold can be disassembled and installed.

在運輸的過程中需要利用繩子將預制線纜槽模具固定，這樣才能保證在運輸的過程中不會出現滑動的情況，這樣會出現預制線纜槽模具的形狀出現變化甚至是表面出現破損，這都會導致在灌料時出現漏漿的情況，或者是其他的情況，都是消耗了原料而無法得到產品，這對廠商來說是一種浪費，所以應該注意不能出現破損。在運輸過程中應該避免陽光的直射，因為直射的陽光會使預制線纜槽模具的塑料原料出現韌性下降的情況，這樣在制作的過程中就很容易出現損壞，不能承受如此大的壓力，所以需要用防水布將其覆蓋，這樣才能使其避免遭受損傷，延長使用的壽命。

During transportation, the prefabricated cable trough mold needs to be fixed with rope, so as to ensure that there will be no sliding during transportation. In this way, the shape of the prefabricated cable trough mold will change or even the surface will be damaged, which will lead to slurry leakage during filling, or other situations. Raw materials are consumed and products cannot be obtained, which is a waste to the manufacturer, Therefore, attention should be paid not to damage. Direct sunlight should be avoided during transportation, because direct sunlight will reduce the toughness of the plastic raw materials of the prefabricated cable trough mold, so it is easy to be damaged during the manufacturing process and can not bear such a great pressure. Therefore, it is necessary to cover it with waterproof cloth to avoid damage and prolong its service life.