擋土墻模具生產工藝

擋土墻模具供應廠家，生產工藝簡單易懂，易脫模，產品表面光滑，生產整個過程中，產品質量和結構都相對穩定。拆模過程看似簡單，但是也是要按照相應的步驟進行的，如果超過不當，會造成二次使用防撞墻模板的困難。一般都是先要拆上下的拉桿，然后拆左右的螺絲，之后使用鐵錘慢慢敲擊模板，這樣就可以了。

The retaining wall mold supplier has simple production process, easy demoulding, smooth product surface, and relatively stable product quality and structure during the whole production process. The formwork removal process seems simple, but it should also be carried out according to the corresponding steps. If it is not exceeded properly, it will be difficult to use the anti-collision wall formwork again. Generally, the upper and lower pull rods shall be removed first, then the left and right screws shall be removed, and then the hammer shall be used to slowly knock the formwork, so it is OK.

模具的生產成本很低在進行施工的過程中，按操作過程來進行施工就可以了，模具加工的方法非常的簡單，比往常的制作方法快很多，階梯式擋土墻模具的壁厚在三公分左右，加工出來的擋土墻會很耐用，使用的時間也長,模具加工出來的護坡的耐用性非常的好,所以很多的工程都在應用模具加工的方法來進行施工。

The production cost of the mold is very low. During the construction process, it is OK to carry out the construction according to the operation process. The mold processing method is very simple and much faster than the usual production method. The wall thickness of the mold for the stepped retaining wall is about 3cm. The processed retaining wall will be very durable and use for a long time. The durability of the slope protection processed by the mold is very good, So many projects are using mold processing methods to carry out construction.