滅鼠誘餌站模具-防鼠滅鼠毒餌站模具制作原理

滅鼠誘餌站模具-防鼠滅鼠毒餌站模具制作原理

滅鼠誘餌站模具 滅鼠誘餌站模具制作是以工程塑料聚丙烯（簡稱PP）為主要生產原材料的工具。聚丙烯在很多領域都有廣泛的應用，這都是因為聚丙烯的性價比很高，它在模具生產領域的應用也十分廣泛，不僅可以幫助模具生產廠商節省模具的生產成本，還可以保證生產出質量合格的模具，使用這類材料生產出的模具不僅容易脫模，而且可以反復使用。

Moulds for rat killing bait station Moulds for rat killing bait station are mainly made of engineering plastic polypropylene (PP). Polypropylene is widely used in many fields. This is because of its high cost performance ratio. It is also widely used in mold production. It can not only help mold manufacturers save mold production costs, but also ensure the production of qualified molds. The molds produced with this material can not only be easily demoulded, but also can be used repeatedly.

滅鼠誘餌站模具的生產過程也是相對比較簡單的。首先需要準備好生產模具需要的聚丙烯原材料，然后提高生產環境的溫度，隨著溫度的降低，聚丙烯會慢慢開始熔化，等到聚丙烯完全熔化為液體之后，將其倒入到事先準備好的模具生產工具中，隨后降低生產環境的溫度，使聚丙烯開始凝固，聚丙烯完全凝固成型之后滅鼠誘餌站模具的生產就完成了。在進行模具的生產時需要考慮到聚丙烯的用量問題，一般聚丙烯的用量不宜太少，太少的話容易導致生產出的模具側壁厚度不均。模具的尺寸問題是不用擔心的，引入了機器生產的方式，能夠保障生產出的模具的質量。

The production process of the mould of the deratization bait station is relatively simple. First, prepare the polypropylene raw materials needed for the production mold, and then increase the temperature of the production environment. With the temperature decreasing, polypropylene will slowly start to melt. When polypropylene is completely melted into liquid, pour it into the prepared mold production tools, and then reduce the temperature of the production environment to make polypropylene start to solidify. After polypropylene is completely solidified, the production of the mold in the rat killing bait station is completed. The amount of polypropylene should be taken into account during the production of the mold. Generally, the amount of polypropylene should not be too small, which may lead to uneven thickness of the side wall of the mold. There is no need to worry about the size of the mold. The introduction of machine production can ensure the quality of the produced mold.