滅鼠毒餌站模具制作-多功能防鼠滅鼠模具結構簡單 操作便捷
滅鼠毒餌站模具制作-多功能防鼠滅鼠模具結構簡單 操作便捷
滅鼠毒餌站模具擺放時應按一定間隔,緊靠墻邊、花基叢中或墻角;箱體近洞口端應緊靠墻邊并與墻或鼠的跑道平行。在老鼠較多的場所如農貿市場、飲食行業、食堂四周、渣滓中轉站點和城中村等場所,應每隔15-20米放置一個;事業單位、住宅區等則可每隔20-30米放置一個;在普通場所的綠化地、圍墻邊的擺放間距可作恰當調整。該安裝的結構簡單,便于操作、挪動設點和投放藥物。運用時只需將藥物放置在底座的餌槽內,再蓋上面蓋,將該安裝放置在老鼠經常出沒的中央即可,老鼠經洞口進入安裝內攝食餌槽中的藥物,即可到達滅鼠效果。
The molds in the rat killing bait station shall be placed at certain intervals, close to the wall, in the flower base cluster or in the corner of the wall; The box near the opening shall be close to the wall and parallel to the wall or mouse runway. In places where there are many rats, such as farmers' markets, catering industry, around canteens, waste transfer stations and urban villages, one should be placed every 15-20 meters; Public institutions and residential areas can place one every 20-30 meters; The spacing between greening grounds and fences in ordinary places can be properly adjusted. The installation has simple structure, and is convenient for operation, moving the setting point and drug delivery. When using, just place the drug in the bait slot of the base, cover the upper cover, and place the installation in the center where the rats often come and go. The rats can enter the installation through the hole to ingest the drug in the bait slot to achieve the rat killing effect.
滅鼠誘餌站模具 滅鼠誘餌站模具制作是以工程塑料聚丙烯(簡稱PP)為主要生產原材料的工具。聚丙烯在很多領域都有廣泛的應用,這都是因為聚丙烯的性價比很高,它在模具生產領域的應用也十分廣泛,不僅可以幫助模具生產廠商節省模具的生產成本,還可以保證生產出質量合格的模具,使用這類材料生產出的模具不僅容易脫模,而且可以反復使用。
Moulds for rat killing bait station Moulds for rat killing bait station are mainly made of engineering plastic polypropylene (PP). Polypropylene is widely used in many fields. This is because of its high cost performance ratio. It is also widely used in mold production. It can not only help mold manufacturers save mold production costs, but also ensure the production of qualified molds. The molds produced with this material can not only be easily demoulded, but also can be used repeatedly.
滅鼠誘餌站模具的生產過程也是相對比較簡單的。首先需要準備好生產模具需要的聚丙烯原材料,然后提高生產環境的溫度,隨著溫度的降低,聚丙烯會慢慢開始熔化,等到聚丙烯完全熔化為液體之后,將其倒入到事先準備好的模具生產工具中,隨后降低生產環境的溫度,使聚丙烯開始凝固,聚丙烯完全凝固成型之后滅鼠誘餌站模具的生產就完成了。在進行模具的生產時需要考慮到聚丙烯的用量問題,一般聚丙烯的用量不宜太少,太少的話容易導致生產出的模具側壁厚度不均。模具的尺寸問題是不用擔心的,引入了機器生產的方式,能夠保障生產出的模具的質量。采用毒餌站模具滅鼠省工、省毒餌、持續、平安環保。而傳統的投放毒餌方式,只能發揮30%的效率,剩下的毒餌大局部殘留在周邊的土壤中,對環境和水體形成較大的污染。如今運用的毒餌站模具技術,不只讓投餌量大大降低,而且使毒餌可持續發揮作用,不會對環境形成污染。滅鼠毒餌站模具應布放在老鼠棲息、取食和經?;顒拥膱鏊鐔挝辉骸⒔值赖难貕?、綠化帶、渣滓搜集點、水道進出口左近等,特別是飲食行業、食堂、食品倉庫、農貿市場、禽獸養殖場、住宅區、建筑工地、公園等必需設置。
The production process of the mould of the deratization bait station is relatively simple. First, prepare the polypropylene raw materials needed for the production mold, and then increase the temperature of the production environment. With the temperature decreasing, polypropylene will slowly start to melt. When polypropylene is completely melted into liquid, pour it into the prepared mold production tools, and then reduce the temperature of the production environment to make polypropylene start to solidify. After polypropylene is completely solidified, the production of the mold in the rat killing bait station is completed. The amount of polypropylene should be taken into account during the production of the mold. Generally, the amount of polypropylene should not be too small, which may lead to uneven thickness of the side wall of the mold. There is no need to worry about the size of the mold. The introduction of machine production can ensure the quality of the produced mold. Adopt poison bait station mould to kill rats, saving labor and poison bait, sustainable, safe and environmental protection. However, the traditional way of dropping poison bait can only give play to 30% efficiency, and most of the remaining poison bait remains in the surrounding soil, causing greater pollution to the environment and water bodies. The mould technology of poison bait station used today not only greatly reduces the amount of bait, but also enables the poison bait to play a sustainable role and will not pollute the environment. Moulds of rat killing poison bait station shall be placed in places where rats live, feed and often move, such as the unit yard, the wall side of the street, green belts, garbage collection points, the entrance and exit of waterways, etc., especially in the catering industry, canteens, food warehouses, farmers' markets, poultry and animal farms, residential areas, construction sites, parks, etc.
- 滅鼠誘餌站模具-防鼠滅鼠毒餌站模具制作原理 2024-10-31
- 毒餌站模具選材要求-水泥誘鼠滅鼠模具制作 2024-10-31
- 毒餌站模具常用規格-水泥滅鼠塑料模具-新興產品 2024-10-31
- 水泥毒餌站模具-滅鼠模具生產應用 2024-10-31
- 墜砣模具-鐵路墜砣模具制作原理 2024-10-31
- 水泥墜砣模具-鐵路墜砣模具是干什么用的 2024-10-31
- 鐵路墜砣模具內部結構形式 2024-10-31
- 鐵路墜砣模具結構形式特點 2024-10-31
- 鐵路墜砣模具尺寸統一 圓形墜砣模具表面處理技術 2024-10-31
- U型壓重塊模具施工地點-石油配重塊模具現澆生產 2024-10-31
- 石油壓重塊模具生產-馬鞍式配重塊模具操作方法 2024-10-31
- 天然氣管道壓重塊模具-石油管道配重塊模具施工流程 2024-10-31
- 馬鞍式壓重塊模具-混凝土配重塊模具預制生產 2024-10-31
- 配重塊模具生產具體分析 2024-10-31
- 混凝土枕木模具-鐵路軌枕模具生產要求 2024-10-31