裝配式箱涵模具-組裝式箱涵模具-綜合管廊模具生產
裝配式箱涵模具-組裝式箱涵模具-綜合管廊模具生產
采用模塊化自走導軌和設置輪進行自走定位,減少了吊車起重,消除了安全隱患,有效提高了生產效率。針對目前箱涵模具規格多、企業模具投資大的現狀,創新開發調整箱涵高度和寬度組裝模具,做到一模多用,力爭做到標準化涵洞形式。
Modular self-propelled guide rail and setting wheel are used for self-propelled positioning, which reduces crane hoisting, eliminates potential safety hazards and effectively improves production efficiency. In view of the current situation that there are many specifications of box culvert molds and large investment in enterprise molds, innovative development and adjustment of box culvert height and width assembly molds are required to achieve multiple uses of the first mock examination and strive to achieve standardized culvert forms.
裝配式箱涵模具,也叫組裝式箱涵模具,是一種建筑鋼筋預制混凝土的箱形建筑物,是箱涵的迅速施工技術,具備加工廠預制構件生產加工,當場拼裝的特性。
Assembled box culvert mold, also called assembled box culvert mold, is a box building of prefabricated reinforced concrete, a rapid construction technology of box culvert, with the characteristics of production and processing of prefabricated components in the processing plant and on-site assembly.
箱涵模具,關鍵用以規定工程施工周期時間短的建筑項目。一般箱涵工程施工是選用當場捆扎建筑鋼筋、支設、澆筑混凝土,工程施工時間長,在施工期規定短的建筑項目。選用裝配式箱涵能夠 大大縮短工程施工周期時間。
Box culvert mould is used to specify the construction project with short construction period. In general, the construction of box culvert works is to select the construction projects of binding construction reinforcement, erecting and pouring concrete on the spot, with long construction time and short construction period. Assembled box culverts can greatly shorten the construction period.
- 人工魚礁預制模具規格型號-三角形魚礁模具來圖定制 2024-10-31
- 三角型生態魚礁模具-佰程-隧道式魚礁模具-方形框架結構 2024-10-31
- 海底魚礁模具-生態魚礁模具基本介紹 2024-10-31
- 生態魚礁模具-框架魚礁模具-球形結構魚礁模具裝配技術要求 2024-10-31
- 魚礁島模具生產-人工魚礁島模具使用區域及作用 2024-10-31
- 高鐵遮板模具-欄桿遮板模具具體分析 2024-10-31
- F型遮板模具-高鐵H型遮板模具原理簡介 2024-10-31
- 混凝土遮板模具-高鐵遮板模具基本論述 2024-10-31
- 高鐵遮板模具-人行道遮板模具-佰程靜音遮板模具制作工藝 2024-10-31
- 預制高鐵遮板模具-欄桿遮板模具生產優勢 2024-10-31
- 安全島鋼模板生產結構-高速防撞島模具-道閘安全島模具生產廠家 2024-10-31
- 防撞安全島模具-佰程-船型防撞島模具-檢查站防撞島模具結構組成 2024-10-31
- 高速防撞島模具-安全檢測島模具-橋墩模具生產制作流程 2024-10-31
- 高速安全島模具-防撞檢測島模具設置標準 2024-10-31
- 安全島模具現澆模式-防撞島模具生產步驟 2024-10-31